Comparison table of GIT MES System & production process control parameters
qingyuan 2021-06-15 12:03:07

 

Git daily chemical MES Comparison table of production process parameters

 

Process number

PROCE_BASE_TIMER

Process name

Timer

Process description

It is mainly used for production process timing

Parameter number

Parameter name

Parameters to describe

Prop_Timer_Enable

Time enabled

1 Enable : Other parameters will not be valid until they are enabled

Prop_Timer_Value

Time setting

Time settings , Must be greater than 0 The number of

Prop_Timer_Unit

Company

Time unit : when , branch , second

 

 

Process number

PROCE_BASE_ManualConfirm

Process name

Manual validation

Process description

Used for production process execution text prompt

Parameter number

Parameter name

Parameters to describe

Prop_Confirm_Enable

Prompt to enable

1 Enable

Prop_Confirm_Text

Prompt information

Text prompt content

 

 

Process number

PROCE_BASE_ReliefPressure

Process name

Pressure relief

Process description

The device has a pressure control function , Make the equipment change from abnormal pressure state to normal pressure state

Parameter number

Parameter name

Parameters to describe

Prop_ReliefPressure_Enable

Pressure relief enabled

1 Enable

Prop_ReliefPressure_UpperValue

The upper pressure limit

Upper limit of equipment pressure , It can be positive or negative pressure

Prop_ReliefPressure_LowerValue

Lower pressure limit

Lower limit of equipment pressure , It can be positive or negative pressure

 

 

Process number

PROCE_BASE_Zero

Process name

Weighing and clearing

Process description

When the equipment has weighing module , Used for equipment weighing and cleaning

Parameter number

Parameter name

Parameters to describe

Prop_Zero_Enable

Enable

1 Enable

Prop_Zero_Value

Zero weight (Kg)

The device can clear the effective weight of the action , When there is material in the tank, do not clean it , Avoid misoperation in the production process . When the weight of the equipment is greater than the effective value range, it is judged that there is material body in the equipment

 

 

 

Process number

PROCE_BASE_Stir

Process name

stir

Process description

Generally refers to the center of the equipment mixing , The mixing characteristics can be defined according to the mixing function of the equipment

Parameter number

Parameter name

Parameters to describe

Prop_Stir_Enable

Enable

1 Enable

Prop_Stir_Value

Stirring speed

Set the stirring speed , Generally, the stirring speed is not too high

 

 

Process number

PROCE_BASE_StirTop

Process name

Stir on the top

Process description

Above the mixing plant , According to the characteristics of the product, the location of the mixing device is designed

Parameter number

Parameter name

Parameters to describe

Prop_StirTop_Enable

On the top of the mixer

1 Enable

Prop_StirTop_Value

The stirring speed on the top

Set the stirring speed , Generally, the stirring speed is not too high

 

 

Process number

PROCE_BASE_StirBottom

Process name

Stir under the water

Process description

Below the mixing plant , According to the characteristics of the product, the location of the mixing device is designed

Parameter number

Parameter name

Parameters to describe

Prop_StirBottom_Enable

The next stirring is on

1 Enable

Prop_StirBottom_Value

Lower stirring speed

Set the stirring speed , Generally, the stirring speed is not too high

 

 

 

Process number

PROCE_BASE_StirHighSpeed1

Process name

High speed mixing 1

Process description

High speed mixing is mainly defined in toothpaste machine , There are two high-speed stirring devices in the same direction in the toothpaste equipment

Parameter number

Parameter name

Parameters to describe

Prop_StirHighSpeed1_Enable

Enable

1 Enable

Prop_StirHighSpeed1_Value

Stirring speed

The speed of stirring , It's usually set at 500-1500 Between ( undetermined )

 

 

Process number

PROCE_BASE_StirHighSpeed2

Process name

High speed mixing 2

Process description

ditto

Parameter number

Parameter name

Parameters to describe

Prop_StirHighSpeed2_Enable

Enable

1 Enable

Prop_StirHighSpeed2_Value

Stirring speed

The speed of stirring , It's usually set at 500-1500 Between ( According to the actual situation )

 

 

 

 

 

Process number

PROCE_BASE_HOMO

Process name

Homogenization

Process description

It is used in the mixing process of oil and water

Parameter number

Parameter name

Parameters to describe

Prop_Homo_Enable

Enable

1 Enable

Prop_Homo_Value

Homogenization speed

It belongs to high speed stirring shearing process , Speed at 2000 above ( According to the actual situation )

 

 

Process number

PROCE_BASE_VacuumFeed_Powder

Process name

Powder feeding

Process description

Technology in toothpaste machine , Mainly used for powder treatment

Parameter number

Parameter name

Parameters to describe

Prop_VacuumFeedPowder_Enable

Enable

1 Enable

Prop_VacuumFeedPowder_Material

Feed medium

What kind of powder is in the powder bin , So we can infer from which powder tank the material is fed

Prop_VacuumFeedPowder_Value

Feed quantity

The feed demand of powder

Prop_VacuumFeedPowder_ThresholdValue

Ahead of time ( Small valve )

Thresholds for precise control , It is mainly used to adjust the feeding speed of the end weight to improve the accuracy

 

 

 

Process number

PROCE_BASE_VacuumFeed_Mat

Process name

Add raw materials

Process description

Feed directly from the raw material storage tank

Parameter number

Parameter name

Parameters to describe

Prop_VacuumFeedMat_Enable

Enable

1 Enable

Prop_VacuumFeedMat_Material

Feed medium

Set what kind of raw material to put in , So we can infer from which raw material tank

Prop_VacuumFeedMat_Value

Feed quantity

Set the weight of the feed material

Prop_VacuumFeedMat_ThresholdValue

Ahead of time

Feed precise control threshold

Prop_VacuumFeedMat_EndValue

End quantity

 

Prop_VacuumFeedMat_OpenTime

Valve opening time

 

Prop_VacuumFeedMat_CloseTime

Valve closing time

 

Prop_VacuumFeedMat_BlowTime

Purge time

Time to start purging , Usually in seconds , Solve the problem of pipeline material residue

 

 

Process number

PROCE_BASE_FeedMat_Fill

Process name

Vacuum feeding

Process description

It is mainly used to open vacuum and suck material from external container into equipment

Parameter number

Parameter name

Parameters to describe

Prop_FeedMatFill_Enable

Enable

1 Enable

Prop_FeedMatFill_PressureValue

Pressure setting (Mpa)

Set the vacuum level of the equipment tank

 

 

Process number

PROCE_BASE_Vacuum

Process name

vacuum

Process description

It is generally used for deaeration of materials and treatment of other processes

Parameter number

Parameter name

Parameters to describe

Prop_Vacuum_Enable

Pressure enabled

1 Enable

Prop_Vacuum_Value

Pressure setting (Mpa)

The pressure value of the target

Prop_Vacuum_HCValue

Back to the difference (Mpa)

Keep the floating value set by the target pressure value

Prop_Vacuum_EndPressureValue

End the pressure (Mpa)

 

 

 

 

 

Process number

PROCE_BASE_MatDelivery

Process name

Material handling

Process description

It is mainly used for conveying materials from oil-water tank to emulsion tank

Parameter number

Parameter name

Parameters to describe

Prop_MatDelivery_Enable

Enable

1 Enable

Prop_MatDelivery_Target

The target can

Generally refers to the emulsification tank

Prop_MatDelivery_EndValue

It's over (Kg)

The standard threshold value for judging the completion of material transportation

Prop_MatDelivery_DelayTimer

End delay (S)

 

 

 

 

Process number

PROCE_BASE_V_Receive

Process name

Receiving

Process description

It generally refers to the tank from which the emulsification tank absorbs materials

Parameter number

Parameter name

Parameters to describe

Prop_Receive_Enable

Enable

1 Enable

Prop_Receive_Target

Source tank

Generally refers to the oil and water tank

 

 

 

 

 

Process number

PROCE_BASE_TEMP

Process name

heating

Process description

Device temperature control , Generally refers to the heating process

Parameter number

Parameter name

Parameters to describe

Prop_TEMP_Enable

Enable

1 Enable

Prop_TEMP_BlowTime

Discharge time

 

Prop_TEMP_Value

Temperature setting (℃)

The target temperature of the device , Temperature is controlled by pressure

Prop_TEMP_HCValue

Temperature difference (℃)

In order to maintain a certain temperature setting up and down

Prop_TEMP_EndValue

End temperature (℃)

 

 

 

Process number

PROCE_BASE_Cool

Process name

cooling

Process description

Equipment cooling treatment

Parameter number

Parameter name

Parameters to describe

Prop_Cool_Enable

Enable

1 Enable

Prop_Cool_Material

Cold water medium

Cooling water and Chilled water , The chilled water is set for quick cooling , Cooling water is cooled by normal temperature water

Prop_Cool_Value

Temperature setting (℃)

 

Prop_Cool_HCValue

Temperature difference (℃)

 

Prop_Cool_EndValue

End temperature (℃)

 

 

 

Process number

PROCE_BASE_Blow

Process name

Purging

Process description

 

Parameter number

Parameter name

Parameters to describe

Prop_Blow_Enable

Enable

1 Enable

Prop_Blow_PressureValue

Pressure setting (Mpa)

The pressure used for purging , It is generally used to deal with residual materials , Can body drying, etc

Prop_Blow_BlowTime

Purge time (S)

The duration of the action

 

 

 

Process number

PROCE_BASE_Feeding_PDA

Process name

PDA feeding

Process description

 

Parameter number

Parameter name

Parameters to describe

Prop_FeedingPDA_Enable

Enable

1 Enable

Prop_FeedingPDA_OperateAck

confirm

PDA Scan code and equipment linkage processing

Prop_FeedingPDA_PartNO

Name

PDA Scan the current material phase of the code

 

 

Process number

PROCE_BASE_Rewater

Process name

Replenishment

Process description

 

Parameter number

Parameter name

Parameters to describe

Prop_Rewater_Enable

Enable

1 Enable

Prop_Rewater_Value

Make up water quantity

It is mainly used for cleaning residual materials in oil-water boiler

Prop_Rewater_Material

medium

tap water , Purified water, etc

 

 

Process number

PROCE_BASE_Productions

Process name

Capacity acquisition

Process description

After the process is completed, the output value is automatically written to a specific point , Used for automatic reporting of capacity

Parameter number

Parameter name

Parameters to describe

Prop_Productions_Enable

Enable

1 Enable

 

 

 

Process number

PROCE_BASE_PART_Pump

Process name

Transporting semi-finished products

Process description

Transfer the configured semi-finished products to semi-finished products storage tank or mobile storage tank

Parameter number

Parameter name

Parameters to describe

Prop_PartPump_Enable

Enable

1 Enable

Prop_PartPump_Target

Transport target tank

It generally refers to semi-finished product storage tank

Prop_PartPump_PressureValue

Pressure setting

The pressure used in the transportation of semi-finished products

Prop_PartPump_PressureHCValue

Pressure difference

 

Prop_PartPump_SpeedValue

Pump speed setting (Rpm)

If pumping is used , Set the speed of the pump

 

 

Process number

PROCE_BASE_PART_Receive

Process name

Semi finished products

Process description

It is used to confirm the receipt of semi-finished products in storage tank

Parameter number

Parameter name

Parameters to describe

Prop_PartReceive_Enable

Enable

1 Enable

Prop_PartReceive_Target

Source material storage tank

Generally refers to the configuration tank or emulsifying pot

 

Please bring the original link to reprint ,thank
Similar articles

2021-06-05

2021-06-05

2021-06-06

2021-06-09

2021-06-09

2021-06-09

2021-06-10

2021-06-11

2021-06-13

2021-06-13

2021-06-15

2021-06-16