/sbin/ifup: configuration for eth0 not found.
Usage: ifup <device name>

So it should be /etc/sysconfig/network-scripts/ There is no... In this folder ifcfg-eth0 file , If in /etc
/sysconfig/networking/devices There is one in the directory ifcfg-eth0 file , Just copy this file to /etc
/sysconfig/network-scripts/ Just under this folder , Activate it again eth0 Network card ok 了 !

After inquiry and reference /etc/sysconfig/network-scripts/ifup-eth file ,

if is_bonding_device ${DEVICE} ; then

for device in `LANG=C grep -l "^[[:space:]]*MASTER=${DEVICE}" /etc/sysconfig/network-scripts/ifcfg-*` ; do

is_ignored_file "$device" && continue

/sbin/ifup ${device##*/}

done

fi

/sbin/ifup: configuration for eth0 not found Solve more related articles

  1. ubuntu eclipse establish server Tips coud not load the tomcat server configuration at /opt/apache ... Solutions for

    ubuntu eclipse establish server Tips coud not load the tomcat server configuration at /opt/apache ... Solutions for & ...

  2. ubuntu16 Can't find after upgrade eth0 network card Solutions for

    ubuntu16 Can't find after upgrade eth0 network card Solutions for In today's VPS My hands itch for a while , Executed the upgrade command apt-get update Update package index , Source apt-get upgrade Update package apt ...

  3. Centos I can't find eth0 Solution of equipment

    Problem description : ifconfig The command cannot be found eth0 equipment , And /etc/sysconfig/network-scripts/ There are only ifcfg-lo file , But not ifcfg-eth0. Temporary solution one : Use life ...

  4. Error: Cannot open main configuration file &#39;//start&#39; for reading! terms of settlement

    When executed service nagios start start-up nagios when , Report errors :Error: Cannot open main configuration file '//start' for reading ...

  5. Struts2 Medium Unable to load configuration Error analysis and solutions

    When we meet Unable to load configuration. When it's a mistake like this , You can find out the cause of the error according to the specific error prompt . Unable to load configuration. - inter ...

  6. turn : install MySQL encounter MySQL Server Instance Configuration Wizard Unresponsive solutions

    problem : Installed MySQL After that, when you enter the configuration interface , Always show “MySQL Server Instance Configuration Wizard Not responding ”, Stuck all the time . terms of settlement :Win7 In the system , With the authority of the Administrator ...

  7. Vmware After cloning the virtual machine, the network card eth0 change eth1 solve

    In the process of cloning a virtual machine , The network card of the newly cloned machine was found by eth0 Turned into eth1, But there is no eth1 Configuration file for . 1.#ip a View the current ip Address , Found to be eth1 network card 2.#ll /etc/sysconfig/n ...

  8. Goland Tips :configuration is still incorrect The solution of the

    Install well Goland after , Prompt when debugging and compiling goland configuration is still incorrect, Baidu and Google There's no clear answer Google There are some hints on the page , But ...

  9. inux The input ifconfig command , No, eth0, How to solve

    use ifconfig command , Only lo, No, eth0 Solutions for Problem description : Video input ifconfig command , Show eth0 and lo, But I didn't get this result in the virtual machine , It's just lo, The network card is not started , either ip, nothing ...

Random recommendation

  1. U After the disk is inserted into the computer , The prompt needs to be formatted U How to solve ?

    Not ejected U The dish is pulled out U disc , It could damage U Partition table of disk . When you put U When the disk is inserted into the computer , You will be prompted to format U disc , What's going on here , How to solve it ? In fact, only with DiskGenius Hard disk recovery software can solve this problem . Let's look at it with Xiaobian ...

  2. [Java] SSH Frame notes _S2SH Integration steps

    http://tech.ddvip.com/2009-09/1253783051134206.html http://www.blogjava.net/liu0909/archive/2009/07/ ...

  3. bzoj 3165: [Heoi2013]Segment Dynamic convex hull

    3165: [Heoi2013]Segment Time Limit: 40 Sec  Memory Limit: 256 MBSubmit: 202  Solved: 89[Submit][Stat ...

  4. [2012-05-31]awk Record splitters RS

    $awk -v RS= '{print $1}' test RS The default value is \n A newline . Set here RS= Equivalent to RS="" It represents a blank line ( If you misunderstand me, please correct me , In the following example ) ...

  5. JS Pass by value or by reference ?【 Reprint 】

    I've had an interesting problem recently :“JS The values in are passed by value , Or by reference ?” Before analyzing this problem , We need to understand what value passing is (call by value), What is passing by reference (call by reference). ...

  6. win10 Use... Under the system markdown2 What happened

    1. Reprinted from :http://blog.csdn.net/chengjierui/article/details/53065599 Computer system upgrade Win10 I can't start it up after Markdown Pad2, Report errors ’Awe ...

  7. React file ( One ) install

    React It's a flexible framework that can be used for a variety of different projects , You can use it to write new applications , You can also gradually import it into the existing code base without rewriting the entire project . The trial React If you want to play React, Then go CodePen Give it a try . ...

  8. jquery Of call() and apply() Method

    call Method :  grammar :call([thisObj[,arg1[, arg2[,   [,.argN]]]]])  Definition : A method that calls an object , Replace the current object with another object .  explain : call  Methods can be used to ...

  9. nyoj Some sort of sequence

    Some sort of sequence The time limit :3000 ms  |  Memory limit :65535 KB difficulty :4   describe The sequence A Satisfy An = An-1 + An-2 + An-3, n >= 3  Programming , Given A0, A1 ...

  10. php in array_map and array_walk The use of contrast _php skill

    One .array_map() 1.array_map()  Function to apply a user-defined function to each value in the array , And return the array with new value after the user-defined function , If there is no return value after the function , The corresponding new value array is empty . 2. Callback ...